Pulp and Paper Canada

Products Test & Measurement
NewTek Sensors releases hermetically sealed position sensors for pulp and paper


June 25, 2020
By P&PC Staff

Topics

NewTek Sensors has released the HATR series of hermetically sealed AC-LVDTs, which are temperature, vibration and debris tolerant to serve in a variety of inline position measurement applications in the harsh and often caustic conditions of pulp and paper mills.

For example, the sensors serve in process control systems to provide dimensional feedback on tensioning arm position and roller location to control paper thickness.

Featuring a welded ¾-inch hermetically sealed housing, the position sensors are resistant to debris, fluids and caustic materials and operate at high temperatures of 400°F. NewTek can customize the LVDTs with high-temperature materials and special packaging to operate in working temperatures from –200°F to 528°F.

Advertisment

The sensor windings are potted inside the housing with a two-component epoxy, providing protection against hostile environments.

The LVDTs also withstand high shock and vibrations associated with the cutting and dropping logs into carriers within the sawmills.

A thru-bore construction prevents debris, resulting from flying sawdust, from blocking the path of the sensor core for consistent accurate performance. With electrical connections made through a radially mounted connector, the AC-operated LVDTs offer a reduced housing length to fit into smaller spaces.

Units are available in ranges of ±0.05 inch (1.27 mm) to ±10 inches (250 mm). Possessing linearity of <0.25 per cent of full range and repeatability of <0.01 per cent of full range, the HATR series LVDTs ensure consistent thickness of end product during process operations.

As AC-operated linear position sensors, the HATR series are not limited by internal electronics that can fail in extreme environments.

Units interface with the NewTek NTC 6000 LVDT signal conditioner that establishes analog or digital communications via a RS-485 two-wire multi-drop bus to address the needs of today’s process control systems.

The LVDT signal conditioner offers an AC LVDT set-up for quick configuration by non-technical personnel as well as a cybersecurity lockout and tamper detection.