Domtar’s commitment to improving and protecting water quality
Nov. 24, 2017 - Pulp and paper manufacturing requires a lot of water. Fortunately, Domtar pulp and paper mills are located in watersheds with ample water supplies. However, with good fortune comes great responsibility, and Domtar says it is committed to protecting water quality at all of its manufacturing locations.
Since 2012, Domtar has reduced water use at its pulp and paper mills by 5 per cent — equivalent to the amount of water contained in 8,000 Olympic-sized swimming pools.
As it continues to innovate, it is also working to improve water quality and serve as better stewards of our water resources, as highlighted in its 2017 Sustainability Report.
Approach to water quality
In 2016, roughly 94 per cent of the water Domtar used at its pulp and paper mills was sourced from lakes and rivers. After use, it treats and returns about 90 per cent of that water to the watersheds. Some water evaporates into the atmosphere, and small amounts remain in the products it manufactures. Water is also reused an average of 10 times throughout the manufacturing process.
Domtar says it is currently developing models to better understand the cost of using water in its operations. The findings will help lower manufacturing costs and mitigate risks to water quality. It’s also involved in other projects focused on improving water quality and protecting this precious natural resource.
For example, in September 2017, Domtar’s Kamloops, B.C., pulp mill completed its annual report on the environmental conditions in the lower Thompson River, which mill employees have been monitoring since the late 1970s. In 2004, other organizations joined the effort, including the British Columbia Ministry of Environment & Climate Change Strategy, Environment Canada, the City of Kamloops and the Village of Ashcroft. The partnership expanded monitoring to the North and South Thompson rivers and additional areas of the lower part of the river.
Water quality at Kamloops Mill
“Back in the 1970s, there was concern about high algae growth in the river, which was believed to be a result of manufacturing in the area,” said Kristin Dangelmaier, Kamloops Mill environmental manager. “There were also concerns about the health of the water for the fish.”
Decades of meticulous monitoring by the mill and other stakeholders found that: the presence of algae is natural and necessary; phosphorous levels in the river need to be maintained at low levels to discourage an algae bloom; and Domtar and its neighbours have equal responsibility in maintaining water quality in the Thompson River.
Domtar says it remains committed to maintaining the water quality of all watersheds surrounding its pulp and paper mills and to understanding and lowering the financial and environmental costs of its water usage.
SOURCE Domtar Newsroom
Georgia-Pacific to shutter some U.S. mill operations for bleached board, particleboardJune 14, 2019 – Georgia-Pacific is closing its bleached board…
Allnorth to engineer new straw pulp mill in GermanyJune 13, 2019 – Allnorth, a Vancouver-based engineering and construction…
Canfor Pulp temporarily curtailing Taylor BCTMP millJune 14, 2019 – Canfor Pulp Products has announced it…
Cascades joins Amazon network for sustainable e-commerce packagingJune 17, 2019 – Cascades has joined the Amazon Packaging…
PAPTAC Atlantic Branch Conference
September 18-20, 2019
October 1-4, 2019
FPInnovations Pulp, Paper & Bioproducts Course
October 7-11, 2019
FPInnovations Applied Tissue Course
November 5-6, 2019
Nordic Wood Biorefinery Conference
March 24-26, 2020
32nd International Mechanical Pulping Conference
June 7-10, 2020